Mason Archival Repository Service

Hum-Power Controller for Powered Wheelchairs

Show simple item record Nik, Hossein Ghaffari
dc.creator Nik, Hossein Ghaffari 2009-07-31 2009-09-29T14:38:01Z NO_RESTRICTION en_US 2009-09-29T14:38:01Z 2009-09-29T14:38:01Z
dc.description.abstract The objective of this work is to create a control mechanism for smooth operation of powered wheelchairs through speech recognition and humming detection. Users of wheelchairs are estimated to be about 200 million people worldwide. In the U.S.A., roughly 11000 people are affected by spinal cord injury every year, with 47 percent of those accidents leading to quadriplegia [15]. The technology developed in the last ten years for assistive technology will significantly impact and improve the life of wheelchair users. While current powered wheelchairs, originally designed to facilitate maneuvering through indoor and outdoor areas, have helped millions of people with their handicap, many of these users state that power chairs do not entirely fulfill their needs. A survey of currently commercialized control systems for powered wheelchairs resulted in identification of many shortcomings [15, 30]. Joysticks, head-arrays and push-button controllers all require precise and accurate movement in the hands or neck for smooth operation of the power chair. Sip-n-puff controllers solve the latter issue, where the user is able to control the movement of the chair using specific suck and blow operations on a tube. Although this controller solves the mobility problem of the users, it is still awkward and unpleasant to use in public [2, 9, 10]. The main shortcoming we detected was the lack of smooth control in speed and direction of movement due to patients’ physical limitations. To resolve this deficiency we designed, developed, and tested a new control unit that interfaces with commercially available wheelchairs. Our controller utilizes speech recognition technology and facilitates hands free operation of power chairs by all users through simple voice commands. Digital signal processing is also implemented to tackle smooth control limitations. The Hum-power controller allows the user to smoothly change the speed of the chair using the frequency of their humming which is captured via an accelerometer attached to their neck. This controller enables complete hands free smooth control of the powered wheelchairs for all users and especially for those who cannot use conventional controllers. We currently use two digital signal processors from Microchip™ (dsPIC30F6014/A) mounted on a custom designed printed circuit board to perform smooth humming control and speech recognition. One DSP is dedicated to speech recognition and implements Hidden Markov Models using dsPIC30F Speech Recognition Library developed by Microchip; the other implements Fast Fourier Transforms on humming signals. The current design has shown that our idea of smooth control not only works, but can be implemented in real time. We have built a prototype, which was implemented and tested on Invacare’s Storm TDX5 (mid-wheel drive power chair) donated to us by East Coast Rehab, LLC.
dc.language.iso en_US en_US
dc.subject speech recognition en_US
dc.subject smooth control en_US
dc.subject powered wheelchair en_US
dc.subject rehabilitation technology en_US
dc.subject humming control interface en_US
dc.subject assistive technology en_US
dc.title Hum-Power Controller for Powered Wheelchairs en_US
dc.type Thesis en Master of Science in Electrical Engineering en_US Master's en Electrical Engineering en George Mason University en

Files in this item

This item appears in the following Collection(s)

Show simple item record

Search MARS


My Account